New RFID Spec Promising 600 Reads/Minute

Written by Evan Schuman
November 16th, 2007

As EPCGlobal is still finalizing its High Frequency (HF) Gen2 tag protocol standard, a source working with the group says they are seeing speeds of 600 reads/minute, compared with 100 reads/minute for today’s HF tags and about 250 reads/minute for today’s Ultra High Frequency (UHF) tags.

"That’s huge," said Drew Nathanson, an RFID analyst for the Venture Development Corp..

Nathanson is finishing up a report on RFID activity within the transactional kiosk space and was surprised at the popularity of smartcard-reading kiosks that no longer support magstripes.

How many of these transactional kiosks does Nathanson see turning their back on their old friend, the regular credit card? Quite a few. In 2005, about 4.5 percent of such kiosks shipped with no magstripe support across the world, a figure that jumped to 11 percent last year and then to almost 16 percent this year, he said.

In the U.S.—where banks have been much slower to embrace smartcards—the numbers are smaller, but they still show an extremely steep increase, from 0.5 percent shipping in 2005 without magstripe support to 1.5 percent last year and four percent this year.


Comments are closed.


StorefrontBacktalk delivers the latest retail technology news & analysis. Join more than 60,000 retail IT leaders who subscribe to our free weekly email. Sign up today!

Most Recent Comments

Why Did Gonzales Hackers Like European Cards So Much Better?

I am still unclear about the core point here-- why higher value of European cards. Supply and demand, yes, makes sense. But the fact that the cards were chip and pin (EMV) should make them less valuable because that demonstrably reduces the ability to use them fraudulently. Did the author mean that the chip and pin cards could be used in a country where EMV is not implemented--the US--and this mis-match make it easier to us them since the issuing banks may not have as robust anti-fraud controls as non-EMV banks because they assumed EMV would do the fraud prevention for them Read more...
Two possible reasons that I can think of and have seen in the past - 1) Cards issued by European banks when used online cross border don't usually support AVS checks. So, when a European card is used with a billing address that's in the US, an ecom merchant wouldn't necessarily know that the shipping zip code doesn't match the billing code. 2) Also, in offline chip countries the card determines whether or not a transaction is approved, not the issuer. In my experience, European issuers haven't developed the same checks on authorization requests as US issuers. So, these cards might be more valuable because they are more likely to get approved. Read more...
A smart card slot in terminals doesn't mean there is a reader or that the reader is activated. Then, activated reader or not, the U.S. processors don't have apps certified or ready to load into those terminals to accept and process smart card transactions just yet. Don't get your card(t) before the terminal (horse). Read more...
The marketplace does speak. More fraud capacity translates to higher value for the stolen data. Because nearly 100% of all US transactions are authorized online in real time, we have less fraud regardless of whether the card is Magstripe only or chip and PIn. Hence, $10 prices for US cards vs $25 for the European counterparts. Read more...
@David True. The European cards have both an EMV chip AND a mag stripe. Europeans may generally use the chip for their transactions, but the insecure stripe remains vulnerable to skimming, whether it be from a false front on an ATM or a dishonest waiter with a handheld skimmer. If their stripe is skimmed, the track data can still be cloned and used fraudulently in the United States. If European banks only detect fraud from 9-5 GMT, that might explain why American criminals prefer them over American bank issued cards, who have fraud detection in place 24x7. Read more...

Our apologies. Due to legal and security copyright issues, we can't facilitate the printing of Premium Content. If you absolutely need a hard copy, please contact customer service.